Ngwaahịa
-
FIW 6 0.13mm klaasị na-ere ere 180 waya enamel akpọchiri nke ọma
Waya enamel akpọchiri nke ọma bụ waya nwere ike dochie TIW (waya mkpuchi atọ) maka imepụta ihe ngbanwe.Waya Rvyuan FIW niile na-agafe asambodo VDE na UL, na-agbaso usoro IEC60317-56/IEC60950 U na NEMA MW85-C.Ọ nwere ike idi elu voltaji na atụmatụ mfe winding izute ndị ahịa 'chọrọ.Anyị na-enye FIW sitere na 0.04mm ruo 0.4mm.Biko nweere onwe gị ịkpọtụrụ anyị ma ọ bụrụ na ịchọrọ ya!
-
HTW High Tension Enameled ọla kọpa waya
Ikuku ikuku na-eji enamel nrapado nke onwe ya na mkpuchi mejupụtara na-eme ka ọnọdụ nke nrụpụta mgbanwe mgbanwe dị ọhụrụ.Ọ dị mkpa ka ọ rụọ ọrụ naanị site na ikuku na-ekpo ọkụ n'ime dum, nke nwere ụfọdụ ihe eji arụ ọrụ ma bụrụ ihe na-egosi mmiri.Ya mere, waya magnet nke na-ejide onwe ya nwere ike ịnya ya n'ime eriri na-enweghị bobbin ma gbochie itinye ya.
-
SEIW 180 Solderable Polyester-imide Enaled waya ọla kọpa
Ihe mejupụtara SEIW bụ polyesterimide denatured dị ka ihe mkpuchi nke nwere ike ire ere.N'okwu a, SEIW nwere ike iguzogide oke okpomọkụ yana inwe ihe nke ire ere.Ọ na-egbo mkpa nke winding nke chọrọ soldering, elu okpomọkụ na-eguzogide na elu impedance.
-
G1 0.04mm Enamel ọla kọpa waya maka ọsọ agba anọ
Enameled ọla kọpa waya maka Relay bụ ụdị ọhụrụ enameled waya nwere àgwà nke okpomọkụ iguzogide na onwe mmanu .Ihe mkpuchi ya abụghị naanị na-anọgide na-enwe njirimara nke nguzogide okpomọkụ na ike ịre ahịa yana ọ na-eme ka a pụrụ ịdabere na relay site na ikpuchi ihe ndị na-ete mmanụ n'èzí.
-
0.25mm Hot Ikuku onwe bonding enameled ọla kọpa waya
Nrapagide onwe ya ma ọ bụ nkekọ onwe ya enameled waya ọla kọpa, ya bụ waya magnet nke na-ejikọta ya n'otu oge nyere ụfọdụ ọnọdụ mpụga (ọkụ ma ọ bụ mmanya mmanya).
-
0.05mm Enameled ọla kọpa maka eriri mgbanye
G2 H180
G3 P180
Ngwaahịa a bụ akwụkwọ ikike UL, na ogo okpomọkụ bụ 180 degrees H180 P180 0UEW H180
G3 P180
Oke dayameta: 0.03mm-0.20mm
Ọkọlọtọ etinyere: NEMA MW82-C, IEC 60317-2 -
Klas 180 ikuku na-ekpo ọkụ na-ejide onwe ya magnet winding waya ọla kọpa
SBEIW Okpomọkụ na-eguzogide onwe-njikọ enameled ọla kọpa waya nwere ihe mejupụtara mkpuchi nwere ike iji maka winding mgbe ha na-arụ ọrụ site na mmiri ma ọ bụ ọkụ eletrik na-eme ka bond uwe nke waya jikọtara ibe ha na-akpụzi waya n'ime a dum na-akpaghị aka na compactly mgbe jụrụ. .
-
0.011mm -0.025mm UEW Ultra-mma Enameled ọla kọpa waya
Dị ka ngwaahịa eletrọnịkị n'ahịa na-adịkarị obere na ọkaibe, waya ọla kọpa enamed, ihe dị mkpa maka ngwaahịa eletrọnịkị, na-akawanye njọ.N'ihe fọrọ nke nta ka ọ bụrụ afọ 20 nke enwetara ahụmịhe na teknụzụ magnet waya, dayameta kacha mma anyị na-eme bụ 0.011mm, nke dị nso otu ụzọ n'ụzọ asaa nke ntutu mmadụ.Iji mepụta waya dị otú ahụ na dayameta dị mma, ọ dị anyị mkpa ka anyị nwee nnukwu nsogbu na ịbịaru na eserese nke onye na-eduzi ọla kọpa.Ultra-fine enameled ọla kọpa waya bụ anyị kacha ere ngwaahịa na anyị lekwasịrị anya ahịa.
-
HCCA 2KS-AH 0.04mm Njikọ onwe onye enameled ọla kọpa f
Ma ọla kọpa dị ọcha na ọla kọpa nwere aluminom nwere ike iji ha abụọ dị ka onye na-eduzi waya mgbe enwere mkpa dị iche iche nke ịdị mma ụda.Nnyocha na-egosi na ịdị ọcha dị elu nke ọla kọpa bara uru iji melite ogo ụda.Enwere ike ịhụ na a na-anabatakarị ọla kọpa 4N dị ọcha (99.99%) n'ahịa.
-
0.028mm – 0.05mm Ultra Mkpa Enamel Magnet Winding Copper Waya
Anyị na-ọpụrụiche na mmepụta nke enameled ọla kọpa wires ihe karịrị afọ iri abụọ, na-mere oké rụzuru na ubi nke ezi wires.Ogo nha na-amalite site na 0.011mm nke na-anọchite anya teknụzụ kachasị elu na ihe kacha mma.
Geographical nkesa nke ndị ahịa anyị bụ n'ụwa nile, tumadi na Europe.A na-eji waya ọla kọpa enamel anyị eme ihe n'ọtụtụ ebe dị iche iche, dị ka ngwaọrụ ahụike, ndị na-achọpụta ihe, ihe ngbanwe dị elu na nke dị ala, relays, micro Motors, mkpuchi mgbanye. -
0.038mm Klas 155 2UEW Polyurethane Enameled ọla kọpa
Ngwaahịa a bụ akwụkwọ ikike UL.Ogo okpomọkụ nwere ike ịbụ 130 degrees, 155 degrees na 180 degrees n'otu n'otu.Ngwakọta kemịkalụ nke mkpuchi UEW bụ Polyisocyanate.
Ọkọlọtọ etinyere: IEC 60317-2/4 JIS C3202.6 MW75-C,79,82 -
0.071mm Enameled ọla kọpa maka ikuku moto eletriki
Enamel ọla kọpa maka moto eletriki nke ụlọ ọrụ anyị mepụtara nwere arụmọrụ dị mma iji guzogide oke okpomọkụ, abrasion na corona.
